The QE Pro-FL is ideal for low light level applications such as fluorescence. This robust spectrometer has back-thinned, TE-cooled CCD detector and is preconfigured for fluorescence measurements from 350-1100 nm. The QE Pro-FL’s dynamic range performance ranks it among the highest sensitivity miniature spectrometers available today. This is especially significant for applications such as fluorescence, where signals may be weak and minimum detectable sample limits are often challenging.
- Portable – small footprint, light weight, fiber optic based spectrometer for the field
- Sensitive – high quantum efficiency detector
- Powerful – signal-to-noise ratio of >1000:1
- Stable – cooled detector allows low light detection and prevents spectral distortion
Engineering Specifications | QE Pro-FL |
PHYSICAL | |
Dimensions: (L x W x H) mm and inches | 182 mm (7.17 in.) x 110 mm (4.33 in.) x 47 mm (1.85 in.) |
Weight: kg and lb | spectrometer: 1.15 kg (2.6 lbs.); power supply: 0.45 kg (1 lb.) |
DETECTOR | |
Type: | Hamamatsu scientific grade, back-thinned, TE Cooled, 1044 x 64 element CCD array |
Range: | 185 – 1100 nm |
Quantum efficiency: | 90% (peak) |
SPECTROSCOPIC | |
Wavelength range: | 350 – 1100 nm |
Integration time: | 8 ms to 60 minutes |
Dynamic range: | ~85,000:1 |
Signal-to-noise ratio: | System: 1000:1 (single acquisition) |
Grating: | 14 gratings available (H1–H14), HC1 grating |
Slit: | 5, 10, 25, 50, 100 or 200 µm wide slits (or SMA/FC bulkhead with no slit) |
Optical resolution: | 0.14 – 7.7 nm (Depends on grating and size of entrance aperture) |
Stray light: | <0.08% at 600 nm; 0.4% at 435 nm |
Buffering: | 15,000 spectra |
Fiber optic connector: | SMA 905 and Ocean Optics FC |
ELECTRONICS | |
Power requirement: | Supply voltage: 4.5 – 5.5 V |
Strobe functions: | continuous and single strobe |
Interfaces: | USB 2.0, 480 Mbps (USB 1.1 compatible); RS-232 (5-wire) |
OPERATING CONDITIONS | |
Operating temperature: | 0 °C – 50 °C |
Humidity: | ≤ 90% noncondensing |